Attractive and eye-catching.

The matt black machine polished 5-spoke falx design alloy wheel rim is a special eye-catcher that consequently accentuates the dynamic design of the model.

The machine polishing accentuates the contours and enhances the wheel to an even greater degree. The base paint is mechanically removed from the rotational symmetric surfaces so that the aluminium is revealed. Then a clear lacquer is applied.

Details of wheel rim
Wheel rim size: 9.0Jx20
Wheel bolt circle: 112/5
Wheel offset: 34 mm
Colour: machine polished matt black
Authorisation for snow chains: no

For tyre size: 265/30 R20 94Y XL. The tyre is not included in the items supplied.

Wheel bolts are not included in the items supplied. Please use the existing series wheel bolts.

Warning! The steering angle must be limited for this wheel/tyre size. Note the instructions in the fitting instructions. Check the function of the steering after completion of all work. Note fault memory entries when doing this. The respective SVM code is exclusive for this product and has been tested and is usable for this vehicle.

Only available in combination with rear wheel arch extensions (flaps). Additionally front wheel arch extensions (flaps) are required in Japan. In addition 4 clips are required to secure both front wheel arch extensions (flaps).

Notes:
  • for vehicles from product upgrade model year 2021 with the engines 3.0 TDI/45 TDI (170 kW), 3.0 TDI/50 TDI (210 kW) with tyres 265/30 ZR20 94Y XL only suitable in combination with full roof
  • not suitable for Audi A5/S5 Cabriolet 2.0 TDI (120 kW) with tyres 265/30 R20 94Y XL
  • only in combination with 620 ml TyreFit bottle
  • wheel rim is not approved for rough road countries. Please observe the rough road country list
  • further information concerning rough road countries/rough road countries with customer information is available from your Audi partner
  • significant factors reference wheel rim: machine polished, polished or galvanised chrome wheel rims may not be used in winterly conditions. For manufacturing reasons the wheel rim surface does not have sufficient protection against corrosion and could be damaged by road salt or similar
  • please observe the information reference the maximum permissible axle loading (kg) in the Owners manual
  • A5 Coupé (2017-2019)
  • S5 Coupé (2017-2019)
  • A5 Cabriolet (2017-2019)
  • S5 Cabriolet (2017-2019)
  • A5 Sportback (2017-2019)
  • A5 Sportback g-tron (2017-2019)
  • S5 Sportback (2017-2019)
  • A5 Cabriolet (since 2020)
  • S5 Cabriolet (since 2020)
  • A5 Sportback (since 2020)
  • A5 Sportback g-tron (since 2020)
  • S5 Sportback (since 2020)
  • A5 Coupé (since 2020)
  • S5 Coupé (since 2020)
Description & Details
Attractive and eye-catching.

The matt black machine polished 5-spoke falx design alloy wheel rim is a special eye-catcher that consequently accentuates the dynamic design of the model.

The machine polishing accentuates the contours and enhances the wheel to an even greater degree. The base paint is mechanically removed from the rotational symmetric surfaces so that the aluminium is revealed. Then a clear lacquer is applied.

Details of wheel rim
Wheel rim size: 9.0Jx20
Wheel bolt circle: 112/5
Wheel offset: 34 mm
Colour: machine polished matt black
Authorisation for snow chains: no

For tyre size: 265/30 R20 94Y XL. The tyre is not included in the items supplied.

Wheel bolts are not included in the items supplied. Please use the existing series wheel bolts.

Warning! The steering angle must be limited for this wheel/tyre size. Note the instructions in the fitting instructions. Check the function of the steering after completion of all work. Note fault memory entries when doing this. The respective SVM code is exclusive for this product and has been tested and is usable for this vehicle.

Only available in combination with rear wheel arch extensions (flaps). Additionally front wheel arch extensions (flaps) are required in Japan. In addition 4 clips are required to secure both front wheel arch extensions (flaps).

Notes:
  • for vehicles from product upgrade model year 2021 with the engines 3.0 TDI/45 TDI (170 kW), 3.0 TDI/50 TDI (210 kW) with tyres 265/30 ZR20 94Y XL only suitable in combination with full roof
  • not suitable for Audi A5/S5 Cabriolet 2.0 TDI (120 kW) with tyres 265/30 R20 94Y XL
  • only in combination with 620 ml TyreFit bottle
  • wheel rim is not approved for rough road countries. Please observe the rough road country list
  • further information concerning rough road countries/rough road countries with customer information is available from your Audi partner
  • significant factors reference wheel rim: machine polished, polished or galvanised chrome wheel rims may not be used in winterly conditions. For manufacturing reasons the wheel rim surface does not have sufficient protection against corrosion and could be damaged by road salt or similar
  • please observe the information reference the maximum permissible axle loading (kg) in the Owners manual
Model usage
Attractive and eye-catching.

The matt black machine polished 5-spoke falx design alloy wheel rim is a special eye-catcher that consequently accentuates the dynamic design of the model.

The machine polishing accentuates the contours and enhances the wheel to an even greater degree. The base paint is mechanically removed from the rotational symmetric surfaces so that the aluminium is revealed. Then a clear lacquer is applied.

Details of wheel rim
Wheel rim size: 9.0Jx20
Wheel bolt circle: 112/5
Wheel offset: 34 mm
Colour: machine polished matt black
Authorisation for snow chains: no

For tyre size: 265/30 R20 94Y XL. The tyre is not included in the items supplied.

Wheel bolts are not included in the items supplied. Please use the existing series wheel bolts.

Warning! The steering angle must be limited for this wheel/tyre size. Note the instructions in the fitting instructions. Check the function of the steering after completion of all work. Note fault memory entries when doing this. The respective SVM code is exclusive for this product and has been tested and is usable for this vehicle.

Only available in combination with rear wheel arch extensions (flaps). Additionally front wheel arch extensions (flaps) are required in Japan. In addition 4 clips are required to secure both front wheel arch extensions (flaps).

Notes:
  • for vehicles from product upgrade model year 2021 with the engines 3.0 TDI/45 TDI (170 kW), 3.0 TDI/50 TDI (210 kW) with tyres 265/30 ZR20 94Y XL only suitable in combination with full roof
  • not suitable for Audi A5/S5 Cabriolet 2.0 TDI (120 kW) with tyres 265/30 R20 94Y XL
  • only in combination with 620 ml TyreFit bottle
  • wheel rim is not approved for rough road countries. Please observe the rough road country list
  • further information concerning rough road countries/rough road countries with customer information is available from your Audi partner
  • significant factors reference wheel rim: machine polished, polished or galvanised chrome wheel rims may not be used in winterly conditions. For manufacturing reasons the wheel rim surface does not have sufficient protection against corrosion and could be damaged by road salt or similar
  • please observe the information reference the maximum permissible axle loading (kg) in the Owners manual
  • A5 Coupé (2017-2019)
  • S5 Coupé (2017-2019)
  • A5 Cabriolet (2017-2019)
  • S5 Cabriolet (2017-2019)
  • A5 Sportback (2017-2019)
  • A5 Sportback g-tron (2017-2019)
  • S5 Sportback (2017-2019)
  • A5 Cabriolet (since 2020)
  • S5 Cabriolet (since 2020)
  • A5 Sportback (since 2020)
  • A5 Sportback g-tron (since 2020)
  • S5 Sportback (since 2020)
  • A5 Coupé (since 2020)
  • S5 Coupé (since 2020)
Description & Details
Attractive and eye-catching.

The matt black machine polished 5-spoke falx design alloy wheel rim is a special eye-catcher that consequently accentuates the dynamic design of the model.

The machine polishing accentuates the contours and enhances the wheel to an even greater degree. The base paint is mechanically removed from the rotational symmetric surfaces so that the aluminium is revealed. Then a clear lacquer is applied.

Details of wheel rim
Wheel rim size: 9.0Jx20
Wheel bolt circle: 112/5
Wheel offset: 34 mm
Colour: machine polished matt black
Authorisation for snow chains: no

For tyre size: 265/30 R20 94Y XL. The tyre is not included in the items supplied.

Wheel bolts are not included in the items supplied. Please use the existing series wheel bolts.

Warning! The steering angle must be limited for this wheel/tyre size. Note the instructions in the fitting instructions. Check the function of the steering after completion of all work. Note fault memory entries when doing this. The respective SVM code is exclusive for this product and has been tested and is usable for this vehicle.

Only available in combination with rear wheel arch extensions (flaps). Additionally front wheel arch extensions (flaps) are required in Japan. In addition 4 clips are required to secure both front wheel arch extensions (flaps).

Notes:
  • for vehicles from product upgrade model year 2021 with the engines 3.0 TDI/45 TDI (170 kW), 3.0 TDI/50 TDI (210 kW) with tyres 265/30 ZR20 94Y XL only suitable in combination with full roof
  • not suitable for Audi A5/S5 Cabriolet 2.0 TDI (120 kW) with tyres 265/30 R20 94Y XL
  • only in combination with 620 ml TyreFit bottle
  • wheel rim is not approved for rough road countries. Please observe the rough road country list
  • further information concerning rough road countries/rough road countries with customer information is available from your Audi partner
  • significant factors reference wheel rim: machine polished, polished or galvanised chrome wheel rims may not be used in winterly conditions. For manufacturing reasons the wheel rim surface does not have sufficient protection against corrosion and could be damaged by road salt or similar
  • please observe the information reference the maximum permissible axle loading (kg) in the Owners manual
Model usage

Related articles

*SRP = Manufacturer`s suggested retail price; Audi partner prices may vary; additional costs may be incurred due to installation and necessary Audi Genuine Parts.