Audi Original Accessories Switzerland
Select a car model
Rim, 5-arm falx
Attractive and eye-catching.

The matt black machine polished 5-spoke falx design alloy wheel rim is a special eye-catcher that consequently accentuates the dynamic design of the model.

The machine polishing accentuates the contours and enhances the wheel to an even greater degree. The base paint is mechanically removed from the rotational symmetric surfaces so that the aluminium is revealed. Then a clear lacquer is applied.

Details of wheel rim
Wheel rim size: 9.0Jx20
Wheel bolt circle: 112/5
Wheel offset: 34 mm
Colour: machine polished matt black
Authorisation for snow chains: no

For tyre size: 265/30 R20 94Y XL. The tyre is not included in the items supplied.

Wheel bolts are not included in the items supplied. Please use the existing series wheel bolts.

Warning! The steering angle must be limited for this wheel/tyre size. Note the instructions in the fitting instructions. Check the function of the steering after completion of all work. Note fault memory entries when doing this. The respective SVM code is exclusive for this product and has been tested and is usable for this vehicle.

Only available in combination with rear wheel arch extensions (flaps). Additionally front wheel arch extensions (flaps) are required in Japan. In addition 4 clips are required to secure both front wheel arch extensions (flaps).

Notes:
  • for vehicles from product upgrade model year 2021 with the engines 3.0 TDI/45 TDI (170 kW), 3.0 TDI/50 TDI (210 kW) with tyres 265/30 ZR20 94Y XL only suitable in combination with full roof
  • not suitable for Audi A5/S5 Cabriolet 2.0 TDI (120 kW) with tyres 265/30 R20 94Y XL
  • only in combination with 620 ml TyreFit bottle
  • wheel rim is not approved for rough road countries. Please observe the rough road country list
  • further information concerning rough road countries/rough road countries with customer information is available from your Audi partner
  • significant factors reference wheel rim: machine polished, polished or galvanised chrome wheel rims may not be used in winterly conditions. For manufacturing reasons the wheel rim surface does not have sufficient protection against corrosion and could be damaged by road salt or similar
  • please observe the information reference the maximum permissible axle loading (kg) in the Owners manual

Article No.: 8W0071490A LT7

  • A5 Coupé (2017-2019)
  • S5 Coupé (2017-2019)
  • A5 Cabriolet (2017-2019)
  • S5 Cabriolet (2017-2019)
  • A5 Sportback (2017-2019)
  • A5 Sportback g-tron (2017-2019)
  • S5 Sportback (2017-2019)
  • A5 Cabriolet (since 2020)
  • S5 Cabriolet (since 2020)
  • A5 Sportback (since 2020)
  • A5 Sportback g-tron (since 2020)
  • S5 Sportback (since 2020)
  • A5 Coupé (since 2020)
  • S5 Coupé (since 2020)
Description & Details
Attractive and eye-catching.

The matt black machine polished 5-spoke falx design alloy wheel rim is a special eye-catcher that consequently accentuates the dynamic design of the model.

The machine polishing accentuates the contours and enhances the wheel to an even greater degree. The base paint is mechanically removed from the rotational symmetric surfaces so that the aluminium is revealed. Then a clear lacquer is applied.

Details of wheel rim
Wheel rim size: 9.0Jx20
Wheel bolt circle: 112/5
Wheel offset: 34 mm
Colour: machine polished matt black
Authorisation for snow chains: no

For tyre size: 265/30 R20 94Y XL. The tyre is not included in the items supplied.

Wheel bolts are not included in the items supplied. Please use the existing series wheel bolts.

Warning! The steering angle must be limited for this wheel/tyre size. Note the instructions in the fitting instructions. Check the function of the steering after completion of all work. Note fault memory entries when doing this. The respective SVM code is exclusive for this product and has been tested and is usable for this vehicle.

Only available in combination with rear wheel arch extensions (flaps). Additionally front wheel arch extensions (flaps) are required in Japan. In addition 4 clips are required to secure both front wheel arch extensions (flaps).

Notes:
  • for vehicles from product upgrade model year 2021 with the engines 3.0 TDI/45 TDI (170 kW), 3.0 TDI/50 TDI (210 kW) with tyres 265/30 ZR20 94Y XL only suitable in combination with full roof
  • not suitable for Audi A5/S5 Cabriolet 2.0 TDI (120 kW) with tyres 265/30 R20 94Y XL
  • only in combination with 620 ml TyreFit bottle
  • wheel rim is not approved for rough road countries. Please observe the rough road country list
  • further information concerning rough road countries/rough road countries with customer information is available from your Audi partner
  • significant factors reference wheel rim: machine polished, polished or galvanised chrome wheel rims may not be used in winterly conditions. For manufacturing reasons the wheel rim surface does not have sufficient protection against corrosion and could be damaged by road salt or similar
  • please observe the information reference the maximum permissible axle loading (kg) in the Owners manual

Article No.: 8W0071490A LT7

Model usage
Attractive and eye-catching.

The matt black machine polished 5-spoke falx design alloy wheel rim is a special eye-catcher that consequently accentuates the dynamic design of the model.

The machine polishing accentuates the contours and enhances the wheel to an even greater degree. The base paint is mechanically removed from the rotational symmetric surfaces so that the aluminium is revealed. Then a clear lacquer is applied.

Details of wheel rim
Wheel rim size: 9.0Jx20
Wheel bolt circle: 112/5
Wheel offset: 34 mm
Colour: machine polished matt black
Authorisation for snow chains: no

For tyre size: 265/30 R20 94Y XL. The tyre is not included in the items supplied.

Wheel bolts are not included in the items supplied. Please use the existing series wheel bolts.

Warning! The steering angle must be limited for this wheel/tyre size. Note the instructions in the fitting instructions. Check the function of the steering after completion of all work. Note fault memory entries when doing this. The respective SVM code is exclusive for this product and has been tested and is usable for this vehicle.

Only available in combination with rear wheel arch extensions (flaps). Additionally front wheel arch extensions (flaps) are required in Japan. In addition 4 clips are required to secure both front wheel arch extensions (flaps).

Notes:
  • for vehicles from product upgrade model year 2021 with the engines 3.0 TDI/45 TDI (170 kW), 3.0 TDI/50 TDI (210 kW) with tyres 265/30 ZR20 94Y XL only suitable in combination with full roof
  • not suitable for Audi A5/S5 Cabriolet 2.0 TDI (120 kW) with tyres 265/30 R20 94Y XL
  • only in combination with 620 ml TyreFit bottle
  • wheel rim is not approved for rough road countries. Please observe the rough road country list
  • further information concerning rough road countries/rough road countries with customer information is available from your Audi partner
  • significant factors reference wheel rim: machine polished, polished or galvanised chrome wheel rims may not be used in winterly conditions. For manufacturing reasons the wheel rim surface does not have sufficient protection against corrosion and could be damaged by road salt or similar
  • please observe the information reference the maximum permissible axle loading (kg) in the Owners manual

Article No.: 8W0071490A LT7

  • A5 Coupé (2017-2019)
  • S5 Coupé (2017-2019)
  • A5 Cabriolet (2017-2019)
  • S5 Cabriolet (2017-2019)
  • A5 Sportback (2017-2019)
  • A5 Sportback g-tron (2017-2019)
  • S5 Sportback (2017-2019)
  • A5 Cabriolet (since 2020)
  • S5 Cabriolet (since 2020)
  • A5 Sportback (since 2020)
  • A5 Sportback g-tron (since 2020)
  • S5 Sportback (since 2020)
  • A5 Coupé (since 2020)
  • S5 Coupé (since 2020)
Description & Details
Attractive and eye-catching.

The matt black machine polished 5-spoke falx design alloy wheel rim is a special eye-catcher that consequently accentuates the dynamic design of the model.

The machine polishing accentuates the contours and enhances the wheel to an even greater degree. The base paint is mechanically removed from the rotational symmetric surfaces so that the aluminium is revealed. Then a clear lacquer is applied.

Details of wheel rim
Wheel rim size: 9.0Jx20
Wheel bolt circle: 112/5
Wheel offset: 34 mm
Colour: machine polished matt black
Authorisation for snow chains: no

For tyre size: 265/30 R20 94Y XL. The tyre is not included in the items supplied.

Wheel bolts are not included in the items supplied. Please use the existing series wheel bolts.

Warning! The steering angle must be limited for this wheel/tyre size. Note the instructions in the fitting instructions. Check the function of the steering after completion of all work. Note fault memory entries when doing this. The respective SVM code is exclusive for this product and has been tested and is usable for this vehicle.

Only available in combination with rear wheel arch extensions (flaps). Additionally front wheel arch extensions (flaps) are required in Japan. In addition 4 clips are required to secure both front wheel arch extensions (flaps).

Notes:
  • for vehicles from product upgrade model year 2021 with the engines 3.0 TDI/45 TDI (170 kW), 3.0 TDI/50 TDI (210 kW) with tyres 265/30 ZR20 94Y XL only suitable in combination with full roof
  • not suitable for Audi A5/S5 Cabriolet 2.0 TDI (120 kW) with tyres 265/30 R20 94Y XL
  • only in combination with 620 ml TyreFit bottle
  • wheel rim is not approved for rough road countries. Please observe the rough road country list
  • further information concerning rough road countries/rough road countries with customer information is available from your Audi partner
  • significant factors reference wheel rim: machine polished, polished or galvanised chrome wheel rims may not be used in winterly conditions. For manufacturing reasons the wheel rim surface does not have sufficient protection against corrosion and could be damaged by road salt or similar
  • please observe the information reference the maximum permissible axle loading (kg) in the Owners manual

Article No.: 8W0071490A LT7

Model usage

Related articles

Rim, 5-arm volsella
Rim, 5-arm volsella
Article No.: 4M8071492 LT7
matt black, gloss turned finish, 10.0Jx22
*1.275,00CHF
incl. VAT
Rim, 5-arm volsella
Rim, 5-arm volsella
Article No.: 4M8071492A 17Q
dark galvanic silver, 10.0Jx22
*1.045,00CHF
incl. VAT
Rim, 10-arm talea
Rim, 10-arm talea
Article No.: 4M0071491 LT7
matt black, gloss turned finish, 9.5Jx21
*1.016,00CHF
incl. VAT
Rim, 5-arm avius
Rim, 5-arm avius
Article No.: 80A071491 LT7
matt black, gloss turned finish, 8.5Jx21
*1.016,00CHF
incl. VAT
Rim, 10-spoke lamina
Rim, 10-spoke lamina
Article No.: 4KE071491 LT7
matt black, gloss turned finish, 9.5Jx21
*1.006,00CHF
incl. VAT
Rim, 5-arm falx
Rim, 5-arm falx
Article No.: 4K0071491 LT7
matt black, gloss turned finish, 8.5Jx21
*946,00CHF
incl. VAT
Rim, 5-Y-spoke rotor
Rim, 5-Y-spoke rotor
Article No.: 4M8071493C AX1
black, 10.5Jx23
*923,00CHF
incl. VAT
Rim, 5-V-spoke structured
Rim, 5-V-spoke structured
Article No.: 4K0071492C AX1
black, 10.5Jx22
*899,00CHF
incl. VAT
Rim, 5-Y-spoke rotor
Rim, 5-Y-spoke rotor
Article No.: 4M8071493B LD8
galvanic silver, metallic, 10.5Jx23
*899,00CHF
incl. VAT
Rim, 10-arm talea
Rim, 10-arm talea
Article No.: 4M0071491A AX1
black, 9.5Jx21
*888,00CHF
incl. VAT
Rim, 5-segment-spoke
Rim, 5-segment-spoke
Article No.: 4M8071491 LD8
galvanic silver, metallic, 10.0Jx21
*885,00CHF
incl. VAT
Rim, 5-Y-spoke rotor
Rim, 5-Y-spoke rotor
Article No.: 4M8071493 LD8
galvanic silver, metallic, 10.5Jx23
*878,00CHF
incl. VAT
*Suggested non-binding price by importer AMAG Import Ltd. prices at Audi Partner may vary; additional costs may be incurred for assembly and any Audi Genuine Parts required.